Tile Doctor Pro-Clean Tile And Grout Cleaner    Tile Doctor Concentrated Neutral Tile And Grout Cleaner    Tile Doctor Grout Clean-Up Tile Doctor Nanotech Ultra Clean Tile, Stone And Grout Cleaner Tile Doctor Nanotech Ultra Clean Tile, Stone And Grout Cleaner    Tile Doctor Remove & Go Sealer and Adhesive Remover    Tile Doctor Pro-Clean Tile And Grout Cleaner

     TILE DOCTOR ®            Pro-Clean Tile, Stone And Grout Cleaner

Pro-Clean Tile, Stone and Grout Cleaner
Stripper & Degreaser for Heavily Soiled & Neglected Tile, Stone or Grout. Tile Doctor Pro-Clean Tile And Grout Stripper & Degreaser for Heavily Soiled and Neglected Areas - 1 Litre Bottle
A concentrated, multi-purpose high-alkaline cleaner, stripper and degreaser. Dilute with 3 to 5 parts water to use as a very effective cleaner that removes grease, soap scum, body oil, mildew and algae from areas that have been neglected or subjected to heavy use. Dilute with 2 parts water for the stripping of synthetic and acrylic waxes and floor finishes.
Uses
Use on natural stone floor (such as Granite, Limestone, Slate, and Travertine), Ceramic, Porcelain, Quarry, Saltillo, Terracotta, cement pavers, masonry surfaces, linoleum or resilient flooring.

Travertine tiles showing mould on the grout removed by a strong solution of Pro-Clean.
Method of Application Recommended for the following Surfaces
DO NOT KNEEL IN THIS PRODUCT. AVOID ALL SKIN CONTACT.
1.) Read entire label before using.
2.) Put on Rubber Gloves and Eye Protection.
3.) Sweep, vacuum, or wipe surface.
4.) Mix Pro-Clean Tile & Grout Cleaner as follows:
LIGHT SOIL BUILD-UP: Mix 1 part cleaner to 5 parts water
MODERATE SOIL BUILD-UP: Mix 1 part cleaner to 3 parts water.
STRIPPING OR HEAVY SOIL BUILD-UP: Mix 1 part cleaner to 2 parts water.
5.) Apply solution to surface with mop or sponge.
6.) Allow to dwell 3 to 5 minutes for cleaning, or 5 to 10 minutes when stripping waxes or finishes from floors or other surfaces.
7.) Agitate with synthetic mop, scrub brush, or scrub machine. Do not allow solution to dry on surface.
8.) Remove the dirty solution using a wet-dry vac machine.
9.) Rinse thoroughly with clean water and remove with a wet-dry vac machine.

PLEASE NOTE: It's important to remove any cleaning solution effectively using a wet-dry Vac machine before sealing; any cleaning solution left on the surface may impact the performance of the sealer.
Brick
Ceramic Tile
Concrete Tile
Granite
Grout
Limestone
Porcelain Tile
Quarry Tile
Sandstone
Slate
TerraCotta Tile
Travertine
Coverage
Approximately 4 m² to 15 m² (35 to 160 sq. ft.) per 1 Litre bottle depending on dilution.
Shopping Information
1 Litre bottles £12.00 each.
Postage & Packing £7.50 (Incl.VAT) for 1 item, £10 (Incl.VAT) for two or more items.
5 Litre bottles £48.00 each.
Postage & Packing £10.00 (Incl.VAT) for 1 or more items.

Limitations Handling & Storage
Do not allow Pro-Clean Tile and Grout Cleaner to come into contact with any non-recommended surfaces. ♦ Close container after each use.
♦ Store in original Container only.
♦ Unused, stored product is freeze-thaw stable.

PRECAUTIONS
♦ KEEP OUT OF REACH OF CHILDREN ♦ Irritating to eyes and skin
♦ Harmful if swallowed ♦ Risk of serious damage to eyes.
♦ Avoid contact with eyes, skin and mucous membranes
♦ Rubber gloves and eye protection should be worn during application. Promptly remove clothing soaked in solution.
IF INGESTED:Wash out mouth with water. Do not induce vomiting. If conscious, give half a litre of water to drink immediately. Consult a doctor.
EYE CONTACT:Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination.
SKIN CONTACT:Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash.
IF INHALED:Remove casualty from exposure ensuring one's own safety whilst doing so.